The 10 Best adhesive for polystyrene foam Comparison & Top Picks

Our team of experts has spent considerable time researching and analyzing the adhesive for polystyrene foam. So, if you want detailed insights, make sure you read the entire article carefully in the end.
We always take the extra step when listing and reviewing products, so that our visitors are comes in contact with the best and most reliable adhesive for polystyrene foam. After hours of analysis and research, we conclude that 3M 78 Polystyrene Foam Insulation Spray Adhesive, Translucent 17.9 Oz. Aerosol Can may be the best one for your needs. But, if you are still looking for something cheaper and more reliable, you can go to UltraBoard™ Classic Peel N’ Stick – 1/2” Thick Self-Stick Adhesive Polystyrene Foam Core Mount Board or Mat Backer for Photo Mounting (10 Pack) (Black, 8″ x 10″) .
The table below provides a quick overview of the best adhesive for polystyrene foam. You can check out the design before reading a full review. Also, features that make each product stand out from the crowd are highlighted in order to save your valuable time.

Our comparative list available as well as our recommendations.

To help you make a pleasure buying decision, we have prepared the following section with some key features of each of these adhesive for polystyrene foam. Take a look at the products below and pick the best one that fulfills your needs:

3M 78 Polystyrene Foam Insulation Spray Adhesive, Translucent 17.9 Oz. Aerosol Can

$25.99
6 new from $25.99
Free shipping
as of July 29, 2022 9:13 am

Features

  • Does not attack expanded polystyrene foam
  • Variable width spray
  • Fast drying
  • Bonds expanded and extruded EPS
  • This item is not for sale in Catalina Island

UltraBoard™ Classic Peel N' Stick - 1/2” Thick Self-Stick Adhesive Polystyrene Foam Core Mount Board or Mat Backer for Photo Mounting (10 Pack) (Black, 8" x 10")

$32.09
as of July 29, 2022 9:13 am

Features

  • Photo mount with self-stick adhesive on the board. Press on your photo and it sticks to the mount board. Alternative to picture frames or backer board. Adhesive surface works great with photographs, art, posters, crafts and more!
  • Lightweight foam core mounting board has a rigid foam core with with peel n' stick self-stick adhesive on one side.
  • Available in 8" x 10", 16" x 20", 20" x 24", and 30" x 40" sizes. Additional thicknesses and sizes are available. Call us at (877) 436-6868 for support.
  • Can be used as a picture mount or arts & crafts project mount. Comes with adhesive surface to add photos, fabrics, jewels, or other crafting items to decorate your photo mount.
  • Lab quality foam mounting boards direct from a top photographic industry manufacturer of print mounting supplies and photo mounting supplies that are manufactured and shipped from the USA.

Cubitron II 3M Insulation & Polystyrene 78 Spray Adhesive, INVERTED, Clear, Net Wt 17.9 oz

$25.99
3 new from $25.99
Free shipping
as of July 29, 2022 9:13 am

Features

  • Designed specifically for bonding expanding polystyrene foams (EPS)
  • Forms a bond stronger than the polystyrene foam
  • Will not dissolve or degrade polystyrene
  • Sprays with a lace pattern optimized for foam bonding
  • Provides professional, industrial strength adhesive for demanding applications

UHU Expanded Polystyrene – Transparent Adhesive – Solvent Free – 33ml

$9.99
4 new from $9.99
Free shipping
as of July 29, 2022 9:13 am

Features

  • The UHU Expanded Polystyrene is a long-lasting formula that is suitable for Styrofoam, wood, plastics, metal and glass.
  • This product should be left to dry for approximately 10 minutes then pressed together firmly, adjustments after this will no longer be possible.
  • The Expanded Polystyrene is not suitable for PP or PE but is toluene-free and is resistant to ageing and is waterproof.
  • This glue is solvent free and must be used on a dry and clean surface. This product must be spread evenly on both surfaces.
  • The adhesive gives you a flexible stick and dries clear giving your project a high-quality finish.

Gorilla Heavy Duty Spray Adhesive, Multipurpose and Repositionable, 14 Ounce, Clear, (Pack of 1)

$11.97
27 new from $11.97
Free shipping
as of July 29, 2022 9:13 am

Features

  • Heavy duty - dries permanent
  • Repositionable, non-yellowing, Photo safe
  • Comfort nozzle - wide pad, controlled fine mist - even application
  • Meets new VOC standard
  • Bonds – wood, metal, fabric, foam, plastic, paper, glass leather and more

Beacon Hold The Foam Glue 2oz

$7.97
19 new from $4.10
Free shipping
as of July 29, 2022 9:13 am

Features

  • Bonds All Types of Foam Together
  • Bonds Foam to Fabric, Beads, Trim, Wood, Paper, Cardboard & More
  • Non-Toxic, Instant Grab & Fast Dry
  • Cleans Up Easily With Water
  • Made In USA

AP Products 001-SP213ACC Spray Adhesive - 13 fl. oz.

$30.38
$28.05
30 new from $20.15
Free shipping
as of July 29, 2022 9:13 am

Features

  • Permanently bonds Styrofoam and other polystyrene materials in 4 minutes of less
  • Use with Sta-put spray adhesive to laminate polystyrene foam to other materials
  • Pressure sensitive and water resistant
  • 13 ounce can

M&D 0105 Compression Flattening Ab Lipo Board Post Surgery Foam After Tummy Tuck Tabla Abdominal Moldeadora Gray

$47.58
$43.99
as of July 29, 2022 9:13 am

Features

  • SUPPORT FROM SIDE TO SIDE: The M&D abdominal board is the best alternative when you need extra support on your midsection after an aesthetic procedure. This ab board has soft seams that won't mark your skin and will protect you and your tummy from the discomfort and issues that wearing a generic faja board for a prolonged period of time might bring.
  • FLAWLESS POST OP TANDEM: Wearing this lipo board inside any M&D post op surgery body shaper will help out in the recovery process. Also, this liposuction board will enhance the molding effect your postoperative girdle body shaper has, controlling your belly and those undesired love handles while preventing fluid retention, skin folds, and irritation.
  • FABRICS THAT CARE ABOUT YOU AND YOUR SKIN: M&D 0105 Ab Board is a must-have in your postoperative recovery. Our ab foam board is made out of Polystyrene, a highly breathable and firm material with an inner layer of hypoallergenic cotton. Your skin will be grateful for the delicacy of this ab flattening board.
  • AN UNDERCOVER TUMMY FLATTENING DEVICE: This liposuction ab board is ergonomic and when placing a post surgery compression garment on, it will become virtually invisible underneath. You will be able to wear your favorite outfits while also having the express flattening effect of this tummy board without anybody noticing. Additionally, the lateral "wings" will control your lateral abs.
  • MOLDEA TU FIGURA EN SEGUNDOS: Fajas M&D ofrece una tabla abdominal que aplana la piel del abdomen ayudando a que se adhiera al músculo después de un procedimiento de liposucción evitando además que tu piel se arrugue o retenga líquido. Nuestra tabla abdominal liposuction está fabricada en Poliéstireno con una capa interna de algodón hipoalergénico para mayor comodidad sin irritaciones.

16 Pack Foam Board 11.7x16.5 Inch, CBTONE 3/16 Inch Thick White Polystyrene Foam Sheet for Photo Framing, Art Display and Handicraft

$20.99
as of July 29, 2022 9:13 am

Features

  • This foam board only have a thin paper outer. Recommend for crafts and models.
  • High quality memory retention foam core that can be easily cut into shapes with a craft knife or stanley knife without leaving jagged edges, ideal for craft, home or office needs.
  • Suitable for sign making, photography backgrounds, mounting photos, model making, display boards, school projects, displaying photographs and posters, a range of craft projects, wedding mood boards.
  • 5mm (3/16 of an inch) Thick Foam Board; Pack of 16; A3 Size (11.7 x 16.5 inch); CFC Free Material.
  • CBTONE can provide Quality Warranty. Full refund or replacement can be provided if you are not satisfied with our craft foam board

Elmer's Foam Board Multi-Pack, 18 x 24 Inches, 3/16 Inch Thickness, White, 2 Count

$15.18
13 new from $11.72
as of July 29, 2022 9:13 am

Features

  • Great for craft, school, and work projects
  • Strong paper-to-foam bond prevents peeling
  • Resilient foam core resists denting and crushing
  • Works with paints, markers, glues, and more
  • Lightweight but strong for portability and durability

This unbiased article currently lists a few of the best adhesive for polystyrene foam in the market and also includes in-depth details of every item to help you make the right decision. If you do not find your own choice, check these Cubitron II 3M Insulation & Polystyrene 78 Spray Adhesive, INVERTED, Clear, Net Wt 17.9 oz , it is the best selling item in the market. If you think that the information provided here is confusing, wrong or actually removed from the actual information, please do not hesitate to contact us. We’ll always be there for you.