The 10 Best ender 3 upgrades Comparison & Top Picks

In this modern era, there are lots of brands and companies producing a thousand types of products. it’s true that the different types of ender 3 upgrades are available on the market, but finding the best ender 3 upgrades to suit your budget and needs can be a bit daunting. But, if you leave it in the hands of industry experts like us, you can be sure that you will come up with a reliable and trustworthy ender 3 upgrades. Also, it will save you valuable time and bucks. So, without wasting any more time, let’s dive into the selected comparison.

Our expert team spent hours analyzing, reading real consumer reviews, and pulling from our own personal experiences to bring you our list of the top ten best ender 3 upgrades available on the market right now. We have presented a variety of options from the different reputed brands. So you have many alternatives to pick the perfect one. If you ask us personally, then the ultimate choice, that we would recommend to you is Creality Official Ender 3 Direct Drive Upgrade Kit, Comes with 42-40 Stepper Motor Hotend Kit, 1.75mm Direct Drive Extruder Fan and Cables Support Flexible TPU Filament . If you are looking for something a bit budget-friendly, then you have got your Creality Official Ender 3 Extruder Upgrade Metal MK8 Bowden Extruder Drive Feeder 3D Printer Parts for Ender-3 V2/Ender-3 Pro/Ender-3 Max CR-10/10S Gray Aluminum 1.75mm Filament 3D Printer Extruder . For the rest options, read the article till the very end.

All ten of the options on our list come from reputed brands or companies and have their own unique features that make them great, it’s up to you to decide which one makes the most sense for you. if you are looking for an efficient and effective ender 3 upgrades, our comparison chart should be of great assistance to you.
Here is our comparative list available as well as our recommendations.

A Quick Comparison of Top Rated ender 3 upgrades

To help you make a pleasure buying decision, we have prepared the following section with some key features of each of these ender 3 upgrades. Take a look at the products below and pick the best one that fulfills your needs:

Creality Official Ender 3 Direct Drive Upgrade Kit, Comes with 42-40 Stepper Motor Hotend Kit, 1.75mm Direct Drive Extruder Fan and Cables Support Flexible TPU Filament

$42.99
$39.99
1 used from $36.49
Free shipping
as of December 6, 2022 4:12 am

Features

  • 100% Creality Official - Creality Ender 3 direct drive upgrade kit, compatible with Ender 3/Ender 3 V2/Ender 3 Pro 3D Printer. Supporting all 1.75mm diameter filament especially for flexible filament such as TPU, PLA and other flexible filaments.
  • Easy Assemble - Switch Bowden extrusion to direct extruder at any time and easy to disassembly. It doesn't affect the inherent function of the printer because it's a full extrusion kit. Come with longer connecting cable, tools, accessories and diagram instruction, easy to assemble.
  • Smooth Feed-in - Lower torque requirements on the stepper motor, reducing the possibility of the nozzle blockage when retracting filament and malfunction when loading new filament.
  • Strong & Sturdy All Metal Hotend - This direct extruder kit is all metal structure, durable and wear resistant and Integrated structure is convenient for wiring and replacing.
  • Creality 3D Official Store - We are the ONLY Creality 3D Official store. There are more than 20 engineers for after-sales service and provide 24/7 customer service with 1-year limited and lifetime technical assistance. Please contact us via “ask a question”directly to get the professional assistance.

Creality Official Ender 3 Extruder Upgrade Metal MK8 Bowden Extruder Drive Feeder 3D Printer Parts for Ender-3 V2/Ender-3 Pro/Ender-3 Max CR-10/10S Gray Aluminum 1.75mm Filament 3D Printer Extruder

$19.99
$13.99
as of December 6, 2022 4:12 am

Features

  • 【Quality Assurance】100% official all-metal 3D printer extruder. High quality aluminum alloy material and sandblast to surface oxidization, ensuring this gray extruder is last for long term use. Works better than original plastic stock extruder. Original Creality 3D printers accessories for Ender-3/Ender-3 Pro/Ender-3S/Ender-3 V2/Ender-3 Max/CR-10/CR-10S.
  • 【Work Better】Our 3d printer extruder kits have an adjustable bolt so that you can adjust the pressure of the extruder gear as needed. The extruder drive has better stronger pressure pushing the filament into the printer nozzle and so will improve the printer's performance. 40 Teeth drive gear feeds the 1.75mm filament, compatible with PLA/ABS/Wood/TPU/PTEG.
  • 【Improved Performance】The optimized extruder with metal extrusion and original hotend kit pushes the filament into the printer nozzle, greatly making the metal extruder retain power in filament feed-in. And the beveled filament intake can prevent scraping the filament as it is pulled into the feeder.
  • 【Easy To Install】DIY kit and you need to assemble by yourself. The full necessary screws & parts kit for the extruder is included. Referring to instructions or our 5th picture to install, it is very easy and straightforward to switch to this upgraded part on your machine.
  • 【Official Creality 3D Store】More than 20 engineers provide 24/7 customer service with 12-months limited and lifetime technical assistance. Please kindly contact us(seller) via “ask a question” find us directly cause our customer service will respond to you within 24 hours no matter what question.

Official Creality 3D Printer Ender 3 Dual Z-axis Upgrade Kit with Lead Screw, Metal Power Supply Holder and Stepper Motor, 3D Printer Ugrades Kit for Ender 3, Ender 3 Pro, Ender 3 V2

$42.00
$39.00
2 new from $39.00
5 used from $36.29
Free shipping
as of December 6, 2022 4:12 am

Features

  • 【Increased Accuracy】Compared with original structure, dual Z-axis kit reduces the layer ripple caused by Z-axis vibration, avoiding backlog of filament thoroughly, which improves stability of 3D printing and increases the printing performance of 3D printer.
  • 【Smooth Running】 Upgrade Single Z-axis structure to a dual Z-axis structure, will make the printer more easy to Leveling, both ends of the X axis are raised and lowered synchronously, which reduces difficulty and frequency of bed leveling obviously.
  • 【Stable Performance】 Compared with Closed Timing Belt, this 3D printer parts set still retains the design of stepper motor to ensure screw rod smooth operation.
  • 【High Comparable】The dual z axis upgrade kit is compatible with Ender 3/ Ender 3 Pro/ Ender 3 V2/ 3D printer.Easily improve 3D printers with low cost efficiency to Dual Z axis mode.
  • 【After Sales Service】we pay great attention to the buyer’s user experience. If you have unsolvable problems during installation and use, please feel free to contact us, our after-sales technical team will provide you with detailed solutions within 24 hours.

Creality Ender 3 Glass Bed Upgraded Build Surface Plate, 235x235x4mm

$20.99
$17.99
as of December 6, 2022 4:12 am

Features

  • No Edge Curling - 3D printer coated glass bed, molds could stick on bed firmly without glue, avoiding the issue of print edges curling. A necessary 3d printer upgrade parts.
  • No-indentation Printing - Upgraded Ender 3 glass plate has a much smaller CREALITY logo than older version, avoiding leaving logo indentations on molds surface during 3D printing.
  • Excellent Flatness - Improved 3D printer glass plate provides more flat and more smooth build surface than magnetic mat or pei sticker, ensuring high flatness for the bottom of model.
  • Super Convenient - Very easy to take off the model, no tools needed. This borosilicate glass bed could be fixed with middle sized clips and cleaned with alcohol or acetone at room temperature.
  • Compatibility - The 3D printer parts is applicable with Creality 3D printer Ender-3, Ender-3 Pro, Ender-3S, Ender-3X, Ender-3 V2, Ender-5, Ender-5 Pro and CR-20, CR-20 Pro, pls confirm if this borosilicate glass bed compatible with your printer.

Official Creality New Update Ender 3 Dual Z-axis Upgrade Kit with Metal Power Supply Holder, Stepper Motor and Lead Screw for Ender 3 V2, Ender 3 Pro, Ender 3 3D Printer…

$36.99
as of December 6, 2022 4:12 am

Features

  • [application]100% Creality Original Ender 3 Dual Z-axis Upgrade Kit,compatible with Ender 3, Ender 3 Pro, Ender 3 V2 and Voxelab Aquila 3D Printer.
  • [Easy to install and use] Just plug the one-to-two motor cable directly into the motherboard, not need modders, soldering or changing boards. Please refer to the video and A+ page for installation.
  • [Excellent Performance]With updagrated structure, dual Z-axis kit reduces the layer ripple caused by Z-axis vibration, avoiding backlog of filament thoroughly, which improves 3D printing stability and increases the printing performance.
  • [Precise and Smooth Screw] Precise and smooth screw has high precision and high quality. The guide rail precision is P3-P7. The repeated positioning accuracy reaches 0.01mm. High loading ability and high running speed meet the high-speed running requirement. High quality motor is efficient and reliable with high speed and low noise.
  • [Dust-proof and Mute Design] Elaborate craft, good sealing performance, better dust-proof smooth sliding and maximum mute in high-speed operation.

Creality Upgrade Ender 3 Hotend, Assembled Extruder with Capricorn Bowden PTFE Tubing for Creality Ender 3 Pro/Ender 3 V2 with Silicone Cover×3, 0.4mm Ender 3 Nozzle×3 and 2 Pair Pneumatic Couplers

$20.99
as of December 6, 2022 4:12 am

Features

  • It's 100% Creality Original Upgrade Assembled Extruder Hotend.
  • Original Capricorn XS Serious Bowden PTFE tubing with lowest friction on the market. Less friction means more responsiveness, less retraction, more accurate prints, less slippage, wear, and tear on the extruder, and less clogging when printing chunky filaments such as some woodfills or ironfills.
  • Pluggable: the heating tube and temperature thermistor that from control box, connect them with terminal housing and pin. Then you could plug the hotend kit, easier to replace hotend kit.
  • With more terminal housing and pins as spare parts, in case fail installation and waste.
  • MK8 Extruder Hot End kit, white wire was temperature thermistor, braided wire was heating tube 24V40W.

Official Ender 3 Dual Z-axis Upgrade Kit with Lead Screw, Metal Power Supply Holder and Stepper Motor, Ender Series Ugrade Kit for Creality Ender 3, Ender 3 Pro, Ender 3 V2 3D Printer

$36.99
as of December 6, 2022 4:12 am

Features

  • [application]100% Creality Original Ender 3 Dual Z-axis Upgrade Kit,compatible with Ender 3, Ender 3 Pro, Ender 3 V2 and Voxelab Aquila 3D Printer.
  • [Excellent Performance]With updagrated structure, dual Z-axis kit reduces the layer ripple caused by Z-axis vibration, avoiding backlog of filament thoroughly, which improves 3D printing stability and increases the printing performance.
  • [Easy to install and use] Just plug the one-to-two motor cable directly into the motherboard, not need modders, soldering or changing boards. Please refer to the video and A+ page for installation.
  • [Precise and Smooth Screw] Precise and smooth screw has high precision and high quality. The guide rail precision is P3-P7. The repeated positioning accuracy reaches 0.01mm. High loading ability and high running speed meet the high-speed running requirement. High quality motor is efficient and reliable with high speed and low noise.
  • [Dust-proof and Mute Design] Elaborate craft, good sealing performance, better dust-proof smooth sliding and maximum mute in high-speed operation.

Creality 3D Printer Kit with Aluminum Ender 3 Extruder Upgraded, Compression Die Springs for Bed Leveling, Metal Hand Twist Leveling Nut Suit for Ender 3 Pro/5/5 Pro, CR-10 Series/10V2/20/20 Pro

$18.99
as of December 6, 2022 4:12 am

Features

  • 【Great Replacement】Our Tresbro perfect aluminum adjuster wheels, bed leveling springs combined with the all metal extruded made a big difference in the print quality for your Creality 3D printer. They are awesome upgrades kit for Ender 3, Ender 3 V2, Ender 3 Pro, Ender 3 Max, Ender 5, CR-7, CR-8, CR-10 Series, CR-10 S4, CR-10 S5, CR-10 Mini, CR-10S, CR-10 Plus, CR 20.
  • 【1*Silver Metal Bowden Extruder】The all metal Mk-8 extruder feeder drive 1.75mm filament is very well built and seems to grip the filament alot better than the plastic stock one, that can prevents downtime from the stock plastic version failing, no worries about filament scraping or breaking.
  • 【4*Hand Twist Level Nuts】Metal nuts was more powerful and will twist more tightly than the original plastic nuts. The torque of these nuts is large, making it easier to fine tune the hot bed, which keeps your printer level without having to level it often.
  • 【 4*Small Yellow Compression Springs】The die springs are a worthwhile upgrade, making bed levelling easier and stronger than the stock ones, so you don't have to worry about leveling the bed over and over after wash print.
  • 【 Easy To Install 】 They were super easy to install and works like a charm. Your 3d printer was in major need of these small upgrades and helped improve your print quality alot. If you have any questions and concern, please feel free to contact with us. Our after-sales technical team will provide you with detailed solutions within 24 hours.

Creality Ender 3 / Pro / V2 Plug and Play LCD Color Touch Screen + v3.1 BL Touch + 4.2.7 32Bit Silent Board + Runout Sensor + F1RST LAYER Open-Source Community Firmware - E3 Max / 5 Compatible

$129.99
$119.99
as of December 6, 2022 4:12 am

Features

  • This Ender 3 touch screen is now FULLY open source thanks to a partnership between First Layer and Insanity Automation. The ONLY open source AND Plug-And-Play Ender touch screen on Amazon, flashed at the Creality factory with our custom firmware for more features than ever. NEWLY SUPPORTED: dual gear extruder, filament sensor, mesh bed leveling features, change filament function, screen brightness and standby timer, built in PID tuning, silent touch screen mode, direct drive extruders and more!
  • A custom DWIN_SET makes this the first open source Ender series touch screen on the market to be compatible with any Ender 3 / V2 / Pro / 5 (Ender 5 must update board firmware). Along with more added features than any other touch screen available, this is THE best version of this product available on Amazon right now. With this new open source build, not only have critical bugs preventing users from even turning on their printers been fixed, but more printers than ever can use this touch screen.
  • This is the newest version of Creality's 4.2.7 32 Bit silent control board with authentic TMC2225 Trinamic stepper drivers which greatly reduces the sound of the stepper motors during use. The 4.2.7 board comes flashed with our custom Marlin firmware that works with all Ender 3 series printers. This entire hardware swap will take less than 1 hour and quickly turns your stock Ender into a touch operated printer in just one upgrade as well as adding dozens of features over stock Creality firmware!
  • The BL Touch is an incredibly accurate and reliable auto-mesh bed leveling sensor that probes individual spots for differences in Z height on any print surface such as glass, aluminum, PEI, BuildTak with incredible accuracy to 0.005mm. This is especially great for users with small imperfections or warping in their print surface as manual leveling will never be able to account for these variables. Custom firmware even speeds up this process to further save time while still maintaining accuracy
  • First Layer have partnered with Insanity Automation to hack this touch screen and unlock its full open-source potential! Enhance your Ender 3 / Pro/ V2/ Max/ 5 with previously unavailable features. Please note this Touch screen is flashed with a custom DWIN_SET folder developed by Insanity Automation for First Layer. Please contact F1rst Layer directly for any questions or technical support. A filament runout sensor, 24V silent fan and metal carrying handle are also included in this kit.

Creality Direct Drive Extruder Upgrade Kit for Ender-3 / Ender-3 Pro, Full Assembled of MK8 Extruder, Hotend, 42-40 Stepper Motor, Fan, V-Slot Wheels Carriage, Cables

$39.99
as of December 6, 2022 4:12 am

Features

  • Upgraded Kit - Direct extruder kit for Ender 3, Ender 3S, Ender 3 Pro. Support all 1.75mm diameter filament in the market, especially for flexible filament.
  • Smooth Feed-in - The direct extrusion structure lower torque requirements on stepper motor, reducing the possibility of nozzle blockage when retracting filament.
  • Greater Compatibility - Compared with bowden extruder system, more fit for printing with PLA, TPU and other flexible filaments.
  • Strong & Sturdy - This direct extruder kit is all metal structure, durable and wear resistant.
  • Easy Assemble - Longer connecting cable, tools, accessories and diagram instruction, easy to assemble.

After analyzing the above 10 best-selling ender 3 upgrades, you may get a crystal and clear idea about your product. This article was created with the hope that you will be able to find the best ender 3 upgrades that fits your budget & requirements. And we think that we were able to succeed in this mission.

All the selected ender 3 upgrades are leading products available on the market. If you are looking for a cheap ender 3 upgrades because you will be making limited use of it, go for the Official Creality 3D Printer Ender 3 Dual Z-axis Upgrade Kit with Lead Screw, Metal Power Supply Holder and Stepper Motor, 3D Printer Ugrades Kit for Ender 3, Ender 3 Pro, Ender 3 V2 which will give you what you pay for.

Our request, please don’t forget to share the article with your friends and keep visiting verywellpick.com for more information and reviews. Also if you think you need more information, please feel free to contact me or let me know in the comment box below.