The 10 Best intake manifold for 383 stroker Comparison & Top Picks

Our team of experts has spent considerable time researching and analyzing the intake manifold for 383 stroker. So, if you want detailed insights, make sure you read the entire article carefully in the end.
We always take the extra step when listing and reviewing products, so that our visitors are comes in contact with the best and most reliable intake manifold for 383 stroker. After hours of analysis and research, we conclude that TYFYB Air Gap Aluminum Intake Manifold 350 Satin For 1996 – UP SBC Small Block Chevy Vortec 1500 to 6500 Rpm may be the best one for your needs. But, if you are still looking for something cheaper and more reliable, you can go to Edelbrock 2701 Performer Intake Manifold .
The table below provides a quick overview of the best intake manifold for 383 stroker. You can check out the design before reading a full review. Also, features that make each product stand out from the crowd are highlighted in order to save your valuable time.

Our comparative list available as well as our recommendations.

To help you make a pleasure buying decision, we have prepared the following section with some key features of each of these intake manifold for 383 stroker. Take a look at the products below and pick the best one that fulfills your needs:

TYFYB Air Gap Aluminum Intake Manifold 350 Satin For 1996 - UP SBC Small Block Chevy Vortec 1500 to 6500 Rpm

$168.55
as of January 25, 2023 12:04 am

Features

  • Intake Material: Aluminum;Port sizes measure: 2.06" x 1.18";Intake measures: 4.65" tall
  • 180° high rise design and has a 1500-6500 rpm range
  • The air gap design allows air to flow under the plenum to prevent heat transfer from the engine resulting in more horsepower.
  • Intake is a dual plane square bore style and works with all 4150 Holley style carburetors.
  • Fitment:For Small Block Chevy SBC with 1996 and up Vortec Heads.

Edelbrock 2701 Performer Intake Manifold

$189.95
17 new from $189.95
1 used from $185.63
Free shipping
as of January 25, 2023 12:04 am

Features

  • Made of aluminum with a natural finish.Material:Aluminum
  • Dual plane intake style
  • RPM range is idle to 5, 500 RPM
  • Single carburetor without EGR
  • Use on stock or original equipment standard deck

Aluminum Intake Dual Plane Intake Manifold Compatible With 1996-2000 Chevy Chevrolet SBC L31 Vortec 350 383

$199.99
as of January 25, 2023 12:04 am

Features

  • Dual Plane Design
  • These cast-aluminum manifolds are pressure-tested for leaks
  • Durable and long lasting
  • Improved power from idle to 6,500 rpm
  • Replaces Original Equipment (OE) number: 2116

FEL-PRO MS 90314-2 Intake Manifold Gasket Set

$13.99
$12.76
32 new from $11.38
Free shipping
as of January 25, 2023 12:04 am

Features

  • DESIGNED FOR IMPERFECT SEALING SURFACES -- Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • SEALING TECHNOLOGIES -- Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
  • ENGINEERING EXPERTISE -- Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
  • REAL-WORLD TESTED -- Parts are tested on-vehicle and validated to ensure optimal performance on the road
  • EVERY PART FOR THE REPAIR -- Fel-Pro gasket sets include every part needed for the repair unless otherwise noted

NIBBI Replacement Orginal High Performance CG Intake Manifold Air Joint Boot Connector For Motorcycle Motorcross Dirt Bike CG

$15.99
8 used from $12.37
Free shipping
as of January 25, 2023 12:04 am

Features

  • Modified manifold fit for the most dirt bike mini bike Apollo CG TTR SSR
  • 33mm rubber fit for 26mm 28mm 30mm carburetor.
  • Rubber Side: 33mm, and rubber joint is 1 3/8 inch
  • Mounting Holes: 48mm(Bolt to Bolt)

FEL-PRO MS 96945 Intake Manifold Gasket Set

$26.86
17 new from $26.86
Free shipping
as of January 25, 2023 12:04 am

Features

  • DESIGNED FOR IMPERFECT SEALING SURFACES -- Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • SEALING TECHNOLOGIES -- Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
  • ENGINEERING EXPERTISE -- Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
  • REAL-WORLD TESTED -- Parts are tested on-vehicle and validated to ensure optimal performance on the road
  • EVERY PART FOR THE REPAIR -- Fel-Pro gasket sets include every part needed for the repair unless otherwise noted

JEGS Intake Manifold Install Kit | For Small Block Chevy | Includes Intake Manifold Gasket Set, Water Neck, Heater Hose Fitting, Pipe Plugs, Distributor Hold Down, Return Spring Bracket, Hardware

$44.92
as of January 25, 2023 12:04 am

Features

  • CONTAINS EVERYTHING YOU NEED to compliment your intake manifold installation
  • FITS 1955-1985 small block Chevy engines including 283, 305, 307, 327, 350, 383 (stroker), 400, and others based on the popular platform
  • MADE FROM high quality components and assembly
  • INCLUDES 2 intake gaskets & 2 end seals, 12 intake bolts, distributor gasket, chrome distributor hold down with bolt , 2 of each 1/8 “ npt, 1/4 “ npt, 3/8 “ npt, & 1/2 “ npt pipe plugs, chrome thermostat housing with o-ring seal & 2 bolts, heater hose fitting, chrome throttle spring bracket, carburetor stud kit with 4 studs, 4 nuts, and 4 flat washers
  • NOTE: the intake gaskets in this kit do not have the heat riser port provision. these are recommended for intakes that do not have a heat riser crossover

Edelbrock 2040 Performer EPS Intake Manifold Installation Kit, Multicolor, One Size

$275.95
9 new from $275.95
Free shipping
as of January 25, 2023 12:04 am

Features

  • precision built
  • package dimensions: 22.86 h x 66.04 l x 36.195 w (centimetres)
  • package weight: 16.749 pounds
  • country of origin : united states
  • Fit type: Vehicle Specific

383 STROKER Small Block Chevy Air Cleaner Lid Kit - SBC Tall - Red

$149.00
as of January 25, 2023 12:04 am

Features

  • Built from high-grade die-cast aluminum and proudly made in the USA
  • Fits: Engines featuring a single 2 or 4 barrel carburetor 5" opening at bottom
  • Dimensions: 15" Oval, 8–1/4" Width, 3" Height (base to top of lid)
  • Style: 383 STROKER Logo
  • Color/Finish: Red Powder Coat

Edelbrock 7501 Performer RPM Air-Gap Intake Manifold

$345.95
15 new from $345.95
1 used from $332.11
Free shipping
as of January 25, 2023 12:04 am

Features

  • Dual plane intake style with an Air-Gap
  • Air-Gap design separates the runner from the heat of the lifter-valley cover
  • Temperature sending unit boss clears all water necks
  • No provision for exhaust heated chokes and no exhaust cross-over
  • Will not fit under stock corvette hood and is meant for square bore carburetors

This unbiased article currently lists a few of the best intake manifold for 383 stroker in the market and also includes in-depth details of every item to help you make the right decision. If you do not find your own choice, check these Aluminum Intake Dual Plane Intake Manifold Compatible With 1996-2000 Chevy Chevrolet SBC L31 Vortec 350 383 , it is the best selling item in the market. If you think that the information provided here is confusing, wrong or actually removed from the actual information, please do not hesitate to contact us. We’ll always be there for you.