The 10 Best intake manifold for rsx type s Comparison & Top Picks

Our team of experts has spent considerable time researching and analyzing the intake manifold for rsx type s. So, if you want detailed insights, make sure you read the entire article carefully in the end.
We always take the extra step when listing and reviewing products, so that our visitors are comes in contact with the best and most reliable intake manifold for rsx type s. After hours of analysis and research, we conclude that Skunk2 Racing 307-05-0605 Ultra Series Street Intake Manifold 1.82 L Volume 71 mm TB Inlet 8.74 in. Runners Black Plenum And Runners Ultra Series Street Intake Manifold may be the best one for your needs. But, if you are still looking for something cheaper and more reliable, you can go to PQY Aluminum Intake Manifold + Throttle Body Set Compatible with 06-11 Honda Civic 04-08 Acura TSX Black .
The table below provides a quick overview of the best intake manifold for rsx type s. You can check out the design before reading a full review. Also, features that make each product stand out from the crowd are highlighted in order to save your valuable time.

Our comparative list available as well as our recommendations.

To help you make a pleasure buying decision, we have prepared the following section with some key features of each of these intake manifold for rsx type s. Take a look at the products below and pick the best one that fulfills your needs:

Skunk2 Racing 307-05-0605 Ultra Series Street Intake Manifold 1.82 L Volume 71 mm TB Inlet 8.74 in. Runners Black Plenum And Runners Ultra Series Street Intake Manifold

$578.99
6 new from $578.99
as of January 25, 2023 12:05 am

Features

  • 71mm Throttle Body Opening
  • Hi-Grade Mounting Hardware
  • Lightweight 356 Aluminum Alloy

PQY Aluminum Intake Manifold + Throttle Body Set Compatible with 06-11 Honda Civic 04-08 Acura TSX Black

$229.99
1 used from $184.13
Free shipping
as of January 25, 2023 12:05 am

Features

  • Material: made of high quality Aluminum.
  • 100% quality assurance tested, more responsive, less expensive, easier to install.
  • Improved airflow, an enhanced venturi effect, and both mid-range and top-end power gains.
  • The new, cast-aluminum Intake Manifolds for Honda’s K-series engines are a direct-fit replacement for all '06-'11 Civic Si engines thanks to their unique design and throttle body flanges, which are compatible with OEM throttle bodies as well as those as large as 76mm.
  • The design incorporates runners that are similar in length to the RBC’s but with larger bores, a special tapered design, as well as a larger, tapered plenum that together preserve mid-range power but increase and accelerate airflow to allow for significant top-end power gains.

Skunk2 Racing 307-05-0310 Pro Series Silver Intake Manifold for Honda K-Series Engines

$466.98
7 new from $466.98
as of January 25, 2023 12:05 am

Features

  • Made from highest quality A356 cast-aluminum
  • Larger Plenum and oversized runners to for maximum power gains
  • Improved airflow and enhanced venturi effect
  • Country of Origin : UBolt-on fitment compatible with all OEM sensorsnited States
  • 70mm throttle body opening can be port-matched up to 76mm

Skunk2 307050600 Ultra Series Street Intake Manifold

$525.99
as of January 25, 2023 12:05 am

Features

  • Product Type:Auto Part
  • Item Package Dimension:24.0 " L X16.0 " W X9.0 " H
  • Item Package Weight:15.0 lbs
  • Item Package Quantity:1

Gasket Intake Manifold, 2pcs Thermal Intake Manifold Gasket Replacement Fit for Acura/Civic / K20a‑K20z RSX

$21.52
3 new from $21.27
Free shipping
as of January 25, 2023 12:05 am

Features

  • How to Work: By using thermal gaskets, the intake air temperature can be reduced to a minimum, thus providing your engine with cooler combustion air, which means horsepower and bypassing multiple heat sources can provide you with up to 5% of power, reducing heat high thermal deformation into the intake manifold.
  • How to Work: By using thermal gaskets, the intake air temperature can be reduced to a minimum, thus providing your engine with cooler combustion air, which means horsepower and bypassing multiple heat sources can provide you with up to 5% of power, reducing heat high thermal deformation into the intake manifold.
  • Outstanding Performance: High thermal deformation resistant, is not easy to deform, and will never break like an OEM gasket. Lightweight, practical and durable, it prevents heat absorption and reduces the intake air temperature before reaching the cylinder head.
  • Premium Material : Gasket Intake Manifold with advanced high‑temperature thermal polymer materials prevent heat absorption and maximize horsepower by reducing heat transfer.
  • Product Detail: Intake Manifold Gasket Set directly replaces the OEM intake manifold and throttle body gasket to prevent hot soaking and reduce the intake air temperature before entering the cylinder head.

Goodbest New 70mm Intake Manifold Throttle Body Compatible with K-Series K20 K24 RBC/RRC/PRB/PRC Pattern Acura RSX

$86.99
as of January 25, 2023 12:05 am

Features

  • Goodbest New 70mm Intake Manifold Throttle Body Compatible With K-Series K20 K24 RBC/RRC/PRB/PRC Pattern Acura RSX
  • Compatible With : Dual bolt pattern PRB/PRC and RBC/RRC
  • Compatible With : Require to use Sensors from 2002 RSX Type-S
  • Compatible With : Integra RSX DC5 CIVIC SI EP3 K20 K20A (Acura / K-Series Engines Only)
  • Replace # KTD-70K-DB2

Injen Cold Air Intake System for the 2002-2006 Acura RSX Type-S, w/ Windshield Wiper Fluid Replacement Bottle - Black

$287.19
$261.99
6 new from $261.99
as of January 25, 2023 12:05 am

Features

Part NumberSP1477BLK

Throttle Body Gasket - Compatible with Acura Rsx - Compatible with Honda Civic Si - Thermal 62mm 70mm

$19.99
as of January 25, 2023 12:05 am

Features

  • Thermal Throttle Body Gasket for K Series Engine K20 (2.0L)
  • Compatible with the Factory OEM 62mm - or - 70mm Upgrade Throttle body
  • Quality Gasket - Solid Material - Compatible with Factory and Aftermarket Intake Manifold
  • Compatible with Acura Rsx (DC5) 2002-2006
  • Compatible with Honda Civic Si (EP3) 2002-2005

LKYHHY K20 K24 K-Series Tucked Engine Wiring Harness Compatible with Honda Acura K-Swap Integra CRX EK EG 02-04 RSX Type S&Base,fit for 01-05 Civic Si EP3 Type S / K24 Swap

$79.99
2 new from $79.99
Free shipping
as of January 25, 2023 12:05 am

Features

  • Compatibility:Tucked Engine Harness Compatible with Honda Acura K-Swap CRX EK EG for 02-04 RSX Type S, for 02-04 RSX Base ,for 01-05 Civic EP3 (Type S or K24 Swap).It will not fit RHD cars or RWD cars
  • Advantage: Professional automotive grade wiring. The wiring is long enough. All plugs are included except EVAP and AC. All plugs are labeled for easy identification and use.
  • Features: All plugs have gasoline and diesel resistant housings, and all plugs are designed to work in harsh weather and extreme temperatures (-67°F to 320°F).
  • Material: made of durable material, completely corrosion and dust resistant, high temperature wire ensures good conductivity, 100% tested before shipment.
  • FeaturesAll: plugs included except EVAP and AC Covering is gas and diesel resistant and rated for -67°F to 320°F SAE Certified Automotive Grade Wiring

Rtunes Racing Short Ram Air Intake Kit + Filter Combo RED For 02-06 Acura RSX Type S

$69.99
as of January 25, 2023 12:05 am

Features

  • Item Condition: Brand New
  • The air intake kit can help your engine to draw more cold air resulting in better throttle response and higher explosive horsepower output
  • All necessary mounting hardwares, vacuum hoses and reducers will be included like shown in the picture
  • No additional parts will be needed for installation after you purchase this kit
  • High quality built Washable and Reusable Air Filter as shown in the picture

This unbiased article currently lists a few of the best intake manifold for rsx type s in the market and also includes in-depth details of every item to help you make the right decision. If you do not find your own choice, check these Skunk2 Racing 307-05-0310 Pro Series Silver Intake Manifold for Honda K-Series Engines , it is the best selling item in the market. If you think that the information provided here is confusing, wrong or actually removed from the actual information, please do not hesitate to contact us. We’ll always be there for you.